Tips on How to Clean Doors and Windows

Dry Using a Soft Dry Sponge

Want to know how to clean doors and windows? Well, you have come to the right place and before you complete reading this piece you will be an expert cleaner. If you have PVC Oakville windows & doors, this piece will be more relevant to you. This is because PVC doors and windows are hard to clean and if not handled well, they may end up in bad state. Besides, windows and doors made of vinyl are becoming more popular among homeowners and they are quickly replacing traditional options such as wood.

There are many reasons why we are seeing an influx in vinyl windows and doors. These units are low maintenance, durable and easy to install. So, that means they save on money and time as well. Unlike wood materials, vinyl doesn’t need regular polishing to look great. Total Home Oakville advise homeowners to consider the following tips when cleaning their Oakville windows & doors.

  1. Vacuuming

Ensure that you regularly vacuum your doors and windows around the vents and the vents where dirt often settles. Do not leave any side unvacuumed, so take your time to clean all. Leaving some parts uncleaned gives chances of having dirt accumulating in the windows, which can become difficult to remove.

This dirt can also block them, causing difficulty when operating your Oakville doors & windows. The difficulty causes the application of excessive force, which can cause damage to these appliances.

  1. Washing with a Soft Towel

One of the most efficient ways of taking care of your PVC doors and windows during cleaning is the use of a soft cloth. It preserves the texture and the glossy finish of your appliances, making them remain attractive for a long time.

Vacuuming

Abrasive scrubs, on the other hand, scratch their coatings, exposing them to elements and ruining their beautiful appearance.

When using a soft cloth to clean your doors and windows, make sure you use clean soapy water, preferably warm. It makes sure all the grease and dirt is cleaned, and that no ugly lines are left behind.

  1. Dry Using a Soft Dry Sponge

To avoid water retention on your window frames and doors, use a kitchen towel or a dry sponge to absorb water after cleaning. Rub it on your windows or doors, and make sure the piece is absorbent to absorb as much fluid as possible.
Alternatively, you can use a DIY window cleaner to avoid soaking your windows or doors in water. Mix vinegar and water in the ratio of 1:3. Use a spraying bottle to apply it to your windows and doors and wait for about three minutes. Use your soft dry sponge to rub it. This method saves time and leaves your appliances looking shiny.

Tip:

Always have regular cleaning to your PVC Oakville doors & windows to avoid having a tough time during cleaning.

When choosing cleaning agents, avoid using bleaches and harsh cleaning products. They make your appliances become faded, ruin their finishes, and exposes them to damage-causing elements.

Now you have your answer on how to clean doors and windows.

Leave a Reply

Your email address will not be published. Required fields are marked *